Click on the Product to get the Technical Data

ECMAGROUT 301

Non-Shrink Free Flow, Cementitious Grout Ready to use, addition of specified quality of water. Attains strength of M 50 grade. To mix mechanically, controlled expansion ensures cent percent surface contact area, chloride & iron free.

ECMAGROUT 301

Description

Non-Shrink Free Flow, Cementitious Grout Ready to use, addition of specified quality of water. Attains strength of M 50 grade. To mix mechanically, controlled expansion ensures cent percent surface contact area, chloride & iron free.

Applications

For Grouting Bolt pockets of steel and structural members, Machinery base plates, Bolt pockets for D.G. sets, Generators, turbines Crane rails Compressors.

Technical Sheet

ECMAGROUT 302

Non-Shrink Free Flow, High Strength Cementitious Grout Ready to use, addition of specified quality of water. Attains strength of M 70 grade. To mix mechanically, controlled expansion ensures cent percent surface contact area, chloride & iron free.

ECMAGROUT 302

Description

Non-Shrink Free Flow, High Strength Cementitious Grout Ready to use, addition of specified quality of water. Attains strength of M 70 grade. To mix mechanically, controlled expansion ensures cent percent surface contact area, chloride & iron free.

Applications

Used for Grouting heavy machine base plates, Bolt pockets for D.G. sets, Generators, Crane trails Compressors.

Technical Sheet

ECMAGROUT 304

Expansive Grout Additive For good quality flowable, Nonshrink Cementitious grout.

ECMAGROUT 304

Description

Expansive Grout Additive For good quality flowable, Nonshrink Cementitious grout.

Applications

Used for pressure Grouting with cement Slurry of Honeyconbed, porous concrete structures, duct & bed grouting of pre-stressed cable ducts.

Technical Sheet

ECMAGROUT 305

Low Viscous Epoxy Injection Grout Two component, which yields in good bond strength, very high flowability. High chemical resistant. Solvent free epoxy resin system, Non-shrink.

ECMAGROUT 305

Description

Low Viscous Epoxy Injection Grout Two component, which yields in good bond strength, very high flowability. High chemical resistant. Solvent free epoxy resin system, Non-shrink.

Applications

Used for injection grouting and for filling the base plates for grouting gap width less than 10mm. Used for grounting the cold joints, sealing damp & wet cracks, grounting liquid for adhesion of concrete.

Technical Sheet

ECMAGROUT 306

Epoxy Resin Based Grout Three component, system, good bond strength, High flowability, High chemical resistant, Solvent free and Non-shrink. Dynamic load resistant.

ECMAGROUT 306

Description

Epoxy Resin Based Grout Three component, system, good bond strength, High flowability, High chemical resistant, Solvent free and Non-shrink. Dynamic load resistant.

Applications

Used for grouting for the gap width between 15mm to 75mm. Free flow Grout where excellent free flow characteristics is required. Grounting of bridge bearing plates, machine bed plates, fixing bolts and anchors to fill cavities in concrete.

Technical Sheet

ECMAGROUT 307

Polyster Resin based Anchor Grout Rapid Strength gain, Corrosion resistant, Non-Expansive can also be applied under water, Good consistency, Vibration Resistant.

ECMAGROUT 307

Description

Polyster Resin based Anchor Grout Rapid Strength gain, Corrosion resistant, Non-Expansive can also be applied under water, Good consistency, Vibration Resistant.

Applications

Used for fixing of reinforecement foundation bolts. Anchoring of attachments to concrete rock etc. For Grouting bolt pockets of structural steel members. Rock bed anchors, crane rails fixing etc.

Technical Sheet