Click on the Product to get the Technical Data

ECMAPLAST 100

Water Reducing & Plasticising Admixture Increases Slump/Workability at Low dosage, Improves Strength, Makes Cement savings possible.

ECMAPLAST 100

Description

Water Reducing & Plasticising Admixture Increases Slump/Workability at Low dosage, Improves Strength, Makes Cement savings possible.

Applications

All structural and general concrete work where improved Desity and Quality are equired. Cement saving where excess cement proves necessary to obtain target strength.

Technical Sheet

ECMAPLAST 101

Water Reducing & Retarding Admixture Delays setting time, Avoids crack formation & cold joints. Slump retention over extended period of time. Controls heat of Hydration.

ECMAPLAST 101

Description

Water Reducing & Retarding Admixture Delays setting time, Avoids crack formation & cold joints. Slump retention over extended period of time. Controls heat of Hydration.

Applications

Use in the areas where long transportation time is involved. Avoidance of 'cold joints' where delays in transport or placing of concrete occur-towers, chimneys, high buildings, slipform structures, tunnels/shaft lining, off shore construction and piles.

Technical Sheet

ECMAPLAST 103

Super Plasticiser for High Early Strength Provides high workability / pumpability mix. Cement savings without loss of strength. Early Deshuttering. Easy Compaction in congested reinforcement.

ECMAPLAST 103

Description

Super Plasticiser for High Early Strength Provides high workability / pumpability mix. Cement savings without loss of strength. Early Deshuttering. Easy Compaction in congested reinforcement.

Applications

For pre-cast, pre-stressed concrete, structurally slim high strength concrete, flowing concrete; For high early and ultimate strength.

Technical Sheet

ECMAPLAST 104M

Super Plasticiser & Retarding Admixture High workability without addition of water. Improved quality. High Slump Retaining ability.

ECMAPLAST 104M

Description

Super Plasticiser & Retarding Admixture High workability without addition of water. Improved quality. High Slump Retaining ability.

Applications

Used for pumpable concrete. Used for concreting in hot weather conditions & RMCs for slump retention and producing pumping concrete with high ultimate strength, Suitable for Bridges, Flyover, pre-stressed concrete girders, etc.

Technical Sheet

ECMAPLAST 104 SPL

Super Plasticiser & Retarding Admixture High slump, Improved Quality, Increased Strength, Avoids cracks formation & cold joints.

ECMAPLAST 104 SPL

Description

Super Plasticiser & Retarding Admixture High slump, Improved Quality, Increased Strength, Avoids cracks formation & cold joints.

Applications

Speeds construction, increses workability and cohesion, Aids pumping by reducing line friction and dry packing, Low porosity resulting in substantially improved water penetration resistance and is highly effective for production of RMC.

Technical Sheet

ECMAPLAST 104 HS

Highly Powerful Super Plasticiser with high water reducing capability.

ECMAPLAST 104 HS

Description

Highly Powerful Super Plasticiser with high water reducing capability.

Applications

Used for production of high quality RMC, medium to high strenth concrete, with good slump retention.

Technical Sheet

ECMAPLAST 104 Bloc

Super Plasticiser for Blocks, Pavers Good water reducing capacity, increases strength, reduces cement content, better early gain of strenght.

ECMAPLAST 104 Bloc

Description

Super Plasticiser for Blocks, Pavers Good water reducing capacity, increases strength, reduces cement content, better early gain of strenght.

Applications

Precast concrete industry of concrete bricks concrete blocks, pavers, slabs.

Technical Sheet

ECMAPLAST MS 111

A dry, purified, micronized, high performance pozzolanic mineral admixture formulated to produce concrete with special performance qualities.

ECMAPLAST MS 111

Description

A dry, purified, micronized, high performance pozzolanic mineral admixture formulated to produce concrete with special performance qualities.

Applications

Ideal product for use in concrete exposed to chemical attacks and heavy abrasion/erosion and wear such as industrial floors, runways, roads, and flyovers parking decks etc.

Technical Sheet

ECMAS HP 888

Water Reducing & Plasticising Admixture.

ECMAS HP 888

Description

ECMAS HP 888 is a state of the art superplasticiser based on specially selected and modified Polycarboxylic ethers, to produce exceptional performance.

ECMAS HP 888 provides good water reduction coupled with good workability retention allowing production and placing of high quality concrete, without any problems of set time retardations. Hence ECMAS HP 888 can be used for production of various grades of concretes.

ECMAS HP 888 can be used in different varieties of concretes including those that contain mineral admixtures like PFA, GGBS, Metakaolin, Micro - silica etc.

Applications

High strength concrete.High performance concrete.Concretes with high fluidity. Concretes for congested reinforcement applications. Concretes with high amounts of manufactured sands. Concretes here conventional Superplasticisers cannot give adequate performance.

Technical Sheet

ECMAS HP 890

Super Plasticiser based on selected PC polymers.

ECMAS HP 890

Description

Super Plasticiser based on selected PC polymers.

Applications

Super Plasticiser for concrete of grades M10 to M40 specially designed for RMC industry.

Technical Sheet

ECMAS HP 900

Super Plasticiser based on PC polymers.

ECMAS HP 900

Description

Super Plasticiser based on PC polymers.

Applications

High performance super plasticiser for HPC and HSC specially designed for RMC industry.

Technical Sheet

ECMAS HP 901

Hyper Plasticiser Based on PC technology.

ECMAS HP 901

Description

Hyper Plasticiser Based on PC technology.

Applications

High strength, high slump concrete with low w/c ratio. Used in free flow concrete, high strength concretes SCC.

Technical Sheet

ECMAS HP 902

Hyper Plasticiser Based on latest advances in PC technology.

ECMAS HP 902

Description

Hyper Plasticiser Based on latest advances in PC technology.

Applications

Used for high quality HSC, HPC,SCC.

Technical Sheet

ECMAS HP 903

PC based Hyper Plasticiser with improved properties.

ECMAS HP 903

Description

PC based Hyper Plasticiser with improved properties.

Applications

Very powerful water reducing admixture used for production of HSC, HPC, SCC.

Technical Sheet

ECMAS VMA

Viscosity modifying admixture for concrete.

ECMAS VMA

Description

Viscosity modifying admixture for concrete.

Applications

To enhance the cohesion of concrete specially designed for SCC.

Technical Sheet

ECMAPLAST 105

Air-Entraining Admixture Increased Concrete Workability, Increases resistance to freeze thaw effect & de-icing salt. Controls Heat of Hydration.

ECMAPLAST 105

Description

Air-Entraining Admixture Increased Concrete Workability, Increases resistance to freeze thaw effect & de-icing salt. Controls Heat of Hydration.

Applications

Used for low Permeability Concrete, Water retaining structures (Dams, Reservoirs, Canals).

Technical Sheet

ECMAPLAST 106

Accelerating Plasticiser for Concrete Chloride free, Accelerates the intial seting time, Provide Rapid Development, Strength, Makes quick demoulding possible.

ECMAPLAST 106

Description

Accelerating Plasticiser for Concrete Chloride free, Accelerates the intial seting time, Provide Rapid Development, Strength, Makes quick demoulding possible.

Applications

Used for Precast & Prestressed concrete industry. For concreting in Cold Weather Condition manufacture of Cememt tiles etc.

Technical Sheet

ECMAPLAST 107

Admixture for Blocks High Performance, Minimises the damage to Block edges.

ECMAPLAST 107

Description

Admixture for Blocks High Performance, Minimises the damage to Block edges.

Applications

Used in Concrete Block Industry in order to get high quality and neat finished Concrete Blocks. Cement Saving - strength Densityand yield maintained with less cement. Increased strngth - higher strength without additional cement. Reduced Breakages- breakages reduced through increased "Green Strength". Increased Durability- Air entrainment offers resistance to attack by frost and de-icing salts.

Technical Sheet

ECMAPLAST 108

Admixture for Mortar High performance in making smooth creamy Mortar with all types of Sands. Minimises Shrinkage cracks. Improves weather resistance. Reduces Rebound losses.

ECMAPLAST 108

Description

Admixture for Mortar High performance in making smooth creamy Mortar with all types of Sands. Minimises Shrinkage cracks. Improves weather resistance. Reduces Rebound losses.

Applications

Used for Plastering, Screeding work, in order to improve finish & appearance of the surface both internally and externally. Incresaes yeild in cement motar. Internationally used for faster, higher quality plastering and mansonry. Increased water retention.

Technical Sheet

ECMAPLAST 109

Polymer based admixture for tiles, paver blocks.

ECMAPLAST 109

Description

Polymer based admixture for tiles, paver blocks.

Applications

For manufacturing better quality files, power blocks, precast elements with increased strength & optmimun cement contents.

Technical Sheet

ECMAPLAST 110

Retarding Plasticiser for cement motar and plasters.

ECMAPLAST 110

Description

Retarding Plasticiser for cement motar and plasters.

Applications

To extend the set time of plasters and motars to enable longer application times of mixed motar.

Technical Sheet

ECMAS F 112

Foaming admixture for light weight concrete blocks.

ECMAS F 112

Description

Foaming admixture for light weight concrete blocks.

Applications

To produce foam to incoporate into concrete motars for the production of lightweight building blocks.

Technical Sheet

ECMAS SR 113

Shrinkage reducing admixture.

ECMAS SR 113

Description

Shrinkage reducing admixture.

Applications

Used in concrete where shrinkage is critical e.g. concrete floor.

Technical Sheet

ECMAS SC 114

Alkali free liquid accelerator for sprayed concrete, motars.

ECMAS SC 114

Description

Alkali free liquid accelerator for sprayed concrete, motars.

Applications

Used for sprayed concrete in guniting, shotcreting application in tunnels, galleries, embankment, retaining wall, etc.

Technical Sheet

ECMAGUARD WPL

Plasticising Integral Liquid Waterproof Admixture Makes concrete water tight. Improves workabily, Cohesion of the mix. Disperses instantly with gauging water making concrete water tight.

ECMAGUARD WPL

Description

Plasticising Integral Liquid Waterproof Admixture Makes concrete water tight. Improves workabily, Cohesion of the mix. Disperses instantly with gauging water making concrete water tight.

Applications

Used for low Permeability Concrete, Water retaining structures(Dams, Reservoirs, Canals etc.), Roof slabs, Water proof plaster, Sunken slabs, etc.

Technical Sheet

ECMA RELEASE

Mould Releasing Agent Non-Staining, High Quality. Ensuresgood fair faced concrete. Used as a de-moulding agent.

ECMA RELEASE

Description

Mould Releasing Agent Non-Staining, High Quality. Ensuresgood fair faced concrete. Used as a de-moulding agent.

Applications

Used for all types of form works.

Technical Sheet

ECMACURE

Curing Compound based on Wax Emulation Prevents early water evaporation from concrete and eliminates surface crack formation. One time application. High Quality.

ECMACURE

Description

Curing Compound based on Wax Emulation Prevents early water evaporation from concrete and eliminates surface crack formation. One time application. High Quality.

Applications

Used in areas where water is scarce and conventional water ponding is not possible. Used for vertical & horizontal surface in structures like Chimneys, cooling towers, silos,ass Shell roof concrete faces, Brodge decks, runways etc.

Technical Sheet

ECMA CURE SPL

Liquid admixture for internal curing of concrete, shotcrete and mortars.

ECMA CURE SPL

Description

ECMA CURE SPL is a liquid admixture for internal curing of concrete, shotcrete and mortars. ECMA CURE SPL when added to mix produces an internal membrane, which protects fresh concrete, shotcrete and mortar by reducing water evaporation to allow the concrete to cure. It also improves pumpabilty and stability of the fresh concrete, shotcrete and mortar.

Applications

Applications for concrete, shotcrete and mortar where reduced water evaporation is required to allow concrete to cure in a similar manner to concrete treated with a surface applied, membrane forming curing compound.

Technical Sheet